Firstly ,Power on the Chinacnczone Pulse Handheld Laser cleaner




Secondly , If the cleaning effect does not meet your requirements, you can also set these parameters in the [Main] Interface as following picture
(Note: following picture is an example setting for 300W pulse cleaning machine, laser power setting as 300 means 100%, it is using F254 field lens with maximum scanning width 145mm.
200W pulse laser cleaning machine is using F210 field lens with maximum scanning width 125mm).
there are 9 kinds of scan modes of Chinacnczone Handheld Pulse Laser Cleaning Machine can be selected. Click the [Scan] button to preview the laser, and click the [Blowing] button to check whether the gas is connected and working properly.

Metal surface cleaning can also refer to the following parameter settings (data from pulse 300W technology factory test).

Third , other parameter setting
1 Language setting, switch to the [Parameter] interface to switch the language


2 If the laser center is found to be offset, you can click [Offset] to adjust it.
You can adjust it by pressing the up, down, left, and right buttons, or by entering numbers after XY offset on the right.


3 [Advanced] interface involved some general parameters of the machine which no need to set up, so we do not recommend to enter this page.
If necessary, please contact the manufacturer to request the access password.

