Chinacnczone RECI 4 IN 1 Handheld Laser Welding Machine combines power with precision, and at the heart of its user experience is an intuitive yet sophisticated touchscreen control system.
Designed for both novice operators and seasoned professionals, this interface streamlines welding, cutting, and cleaning operations.
Here’s a detailed breakdown of its key features, based on the official manual .
1. System Setting: Core Configuration
Accessible via the main menu, this section handles fundamental device setup:
-
System Update: Firmware upgrades (follow dedicated update procedures).
-
Language: Supports multiple languages; toggle instantly with one tap.
-
Product Activation: Reserved for manufacturers (end-users skip this).
-
Restore: Factory reset to default settings.
-
System Restart: Reboots the controller.
-
Version Information: Displays critical software/hardware versions (e.g., touchscreen, controller).
Pro Tip: Always note your firmware version before updating!
2. Param Page: Custom Process Management of Chinacnczone RECI 4 IN 1 Handheld Laser Welder
This is where efficiency shines. Store and recall 9 custom welding parameter sets:
-
Custom Setting: Create profiles for specific materials/thicknesses.
-
Apply: Instantly load a saved profile to the active welding interface.
-
Import: Save current parameters to a profile slot (retained even after power loss).
-
Naming: Label profiles (e.g., “Stainless Steel 3mm”) for quick identification.
Workflow Example:
-
Adjust power, speed, and wire feed for a job.
-
Save as “Profile 5: Aluminum 2mm”.
-
Later, select “Profile 5” → Apply → weld!
3. Advanced Page: Precision Tuning
Unlocked with password 2000, this section offers granular control:
-
Wobble-off Delay: Motor stop delay after laser disable (max 999s).
-
Ramp Up: Time for power to rise from start to peak (e.g., 150ms).
-
Spot Tuning: Adjust lateral beam offset (critical for nozzle centering).
-
Gas On/Off: Toggle shielding gas control.
-
Wire Feed Parameters: Speed/retraction settings during laser-off phases.
Key Parameters:
| Setting | Function |
|---|---|
Spot Tuning |
Fixes misaligned beams; 0.00mm = optimal center. |
Burst Duration |
Controls pulsed laser timing (e.g., 500ms). |
Auto-fusing |
Enables automatic wire melting compensation. |
4. Alarm Page: Real-Time Troubleshooting of
Chinacnczone RECI 4 IN 1 Handheld Laser Welder
The system proactively flags issues with flashing indicators and detailed error codes:
Common Alarms & Solutions:
| Error Code | Issue | Solution |
|---|---|---|
Err-E001 |
Controller communication failure | Check RS485 cable; verify controller power. |
Err-B001 |
Low gas pressure | Confirm gas supply ≥0.2–0.3 MPa. |
Err-L001 |
Laser malfunction | Check laser status (green = OK; red/yellow = fault). |
Err-S003 |
Motor shaft lock failure | Power off → inspect motor-driver connections → reseat terminals. |
Err-C001 |
Chiller alarm | Ensure water temperature ≥20°C; check coolant flow. |
Critical: Clear all alarms before resuming operation—safety first!
Why This System Stands Out
-
User-Friendly: Intuitive icons, multilingual support, and profile saves reduce setup time.
-
Pro-Grade Tuning: Password-protected advanced settings cater to complex workflows.
-
Proactive Safety: Alarms prevent damage to machine/workpieces via real-time monitoring.
Whether you’re welding stainless steel or cleaning surfaces, Chinacnczone’s touchscreen puts control at your fingertips—literally. For optimal results, always cross-reference parameters with the manual’s material-specific tables (e.g., carbon steel vs. aluminum settings).
